Asus M5A99FX Pro R2.0 drivers Windows 10

The motherboard looks quite good, there are no unsoldered elements, there are five connectors for connecting fans, the radiators of the cooling system is large enough, at the same time, the heat sinks of the north bridge and the CPU power converter are connected by a heat pipe.

There’s also an interesting feature that can be seen on the board’s back side: even though the power converter and the north bridge radiators are connected by a heat pipe, each of the radiators has its own type of mounting. The CPU power converter has a spring-loaded plastic nail mount, while the north bridge has a screw mount.

As a system logic set the most senior for AM3+ solution AMD 990FX+SB950 is used. Four slots are soldered for DDR3 memory, which are equipped with snaps on top.

Besides the declared modes, DDR3 800 is supported, though it is not mentioned, but this mode is available in settings and there are no problems with its performance. Splitters for modes above DDR3-1600 are only available for AMD Bulldozer processors. The manufacturer claims the maximum supported memory capacity of 32 GB, which means that the board supports 8 GB modules.

For dual channel mode it is necessary to install memory slots of the same color, i.e. through the slot. The manufacturer recommends using blue slots first, i.e. slots 2 and 4.

The configuration consists of six expansion slots:

• PCI-E X16;
• PCI-E X1;
• PCI-E X4;
• PCI-E X16;
• PCI;
• PCI-E X4.

In place of the possible seventh slot is the cooling system of the north bridge.

How to install the driver for Asus M5A99FX Pro R2.0

To download and install the entire driver package for your printer, follow the instructions in the table below:

1. The first thing to do is to download the right driver. In the table below, select your operating system and click on the “Download” link
2. After the download is complete, you must run the downloaded file. In most cases you should double-click on the installation file to do this.
3. Further actions should be carried out by following the installation guide
4. At the end of the installation, press the “Finish” button and connect the printer to your computer.

Asus M5A99FX Pro R2.0 drivers and software for Windows 10 64-bit

Asus M5A99FX Pro R2.0 drivers and software for Windows 10 32-bit

Asus M5A99FX Pro R2.0 drivers and software for Windows 8.1 32/64-bit

Asus M5A99FX Pro R2.0 drivers and software for Windows 8 32/64-bit

Asus M5A99FX Pro R2.0 drivers and software for Windows XP, 7 32/64-bit

Asus M5A99FX Pro R2.0 manual